Tag - brim

Tech-Tips-3D-Printing-markforged

Tech Tips: 5 Essential Rules

Calibrate the print bed before every print. Wash off the print bed with pure, warm water and dry it clean with lint free towels. Always remember to use Elmer’s glue before printing. Know when to use the brim option or supports. Optimize your print angle. 1.Calibrate the print bed before every print From Markforged, this is the single most important factor in making a successful part with the Mark Two. Before every print, it is essential to balance the build plate against the printheads to guarantee [...]

Read more...